Woodstock SHOP FOX W1754 Manuel d'utilisateur télécharger pdf (Page 19)

-17-

W1754 20" Planer With Mobile Base

OPERATIONS

General

The Model W1754 will perform many types of operations

that are beyond the scope of this manual. Many of these

operations can be dangerous or deadly if performed incor-

rectly.

The

instructions in this section are written with the under-

standing

that the operator has the necessary knowledge

and skills to operate this machine. If at any time you are

experiencing difficulties performing any operation, stop

using

the machine!

you are an inexperienced operator, we strongly recom-

mend

that you read books, trade articles, or seek training

from an experienced planer operator before performing

any

unfamiliar operations. Above all, your safety should

come first!

READ and understand this entire instruc-

tion manual before using this machine.

Serious personal injury may occur if

safety and operational information is not

understood and followed. DO NOT risk

your safety by not reading!

The table moves approximately

/16" with one turn of the

handwheel.

The

basic steps of operating the planer are as follows:

1. Put on safety glasses, respirator, and hearing protec-

tion.

2. Unless your workpiece is very flat, surface plane

one

face of the workpiece on a jointer until it is

flat—having the face flat will ensure that it sits flat

on the planer table during operation.

3. Adjust the table height slightly lower than your

workpiece

to ensure the first cut is as light as pos-

sible

(approximately

/32"–

/16"). This cut removes any

excessive high spots.

4. Start the planer.

5. Making sure not to stand directly in front or behind

the

workpiece to avoid kickback injury, place the

flat side of the board down on the table, and feed

the workpiece through the planer.

— If the cut is too heavy and bogs down the planer,

turn the planer OFF immediately, allow it to come

a complete stop, and remove the workpiece.

Lower the table, then repeat Steps 2–5.

Basic Operation

DO NOT investigate problems or adjust

the planer while it is running. Wait

until the machine is turned OFF and

ll working parts have come to a

complete stop before proceeding!

Damage to your eyes, lungs, and ears

could result from using this machine

without proper protective gear. Always

wear safety glasses, a respirator, and

hearing protection when operating this

machine.

OFF

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Woodstock SHOP FOX W1754 Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Woodstock SHOP FOX W1754