Woodstock SHOP FOX W1754 Manuel d'utilisateur télécharger pdf (Page 9)

-7-

W1754 20" Planer With Mobile Base

SAFETY

Additional Safety Instructions for Planers

USE this and other machinery with caution

and respect. Always consider safety first,

as it applies to your individual working

conditions. No list of safety guidelines can

be complete—every shop environment is

different. Failure to follow guidelines could

result in serious personal injury, damage

to equipment or poor work results.

READ and understand this

entire instruction manual

before using this machine.

Serious personal injury

may occur if safety and

operational information is

not understood and fol-

owed. DO NOT risk your

safety by not reading!

1. INFEED CLEARANCE SAFETY: The infeed roller is designed to pull material into the cutterhead.

Always keep hands, clothing, and long hair away from the infeed roller during operation to pre-

vent

serious injury.

2. BODY POSITION WHILE OPERATING: The workpiece may kick out during operation. To avoid get-

ting

hit, stand to the side of the planer during the entire operation.

3. PLANING

CORRECT MATERIAL: Planing materials not designed for this planer creates a hazard for

yourself and the machine. Only plane natural wood stock with this planer. DO NOT plane MDF,

plywood, laminates, or other synthetic or man-made products.

4. GRAIN

DIRECTION: Planing across the grain is hard on the planer and may cause the workpiece to

kick out. Always plane in the same direction or at a slight angle with the wood grain.

5. CLEAN

STOCK: Only plane clean stock. Planing stock with nails, staples, or imbedded stone will

damage your cutters, and may cause a fire hazard if the dust collector captures sparks or hot par-

ticles

that have contacted the cutters. Always thoroughly inspect and prepare stock to avoid these

hazards.

6. MACHINE LIMITATIONS: The planer may kick out a workpiece at you or you can damage it if it is

pushed

beyond these limits:

• Maximum Depth of Cut:

/8"

• Minimum Board Length: 8"

• Minimum Board Thickness:

/16"

• Maximum # of Boards at One Time: 1

7. LOOKING

INSIDE PLANER: Wood chips fly around inside the planer at a high rate of speed. DO

NOT look inside the planer or remove guards/covers during operation.

8. REMOVING JAMMED WORKPIECES: Attempting to remove jammed workpieces while the planer is

running

may cause serious injury to the operator. Always stop the planer and disconnect power

before removing jams.

9. DULL/DAMAGED

CUTTERS: The planer may kick out a workpiece at the operator or give poor fin-

ish results if it is operated with dull or damaged cutters.

10. UNPLUGGING

DURING ADJUSTMENTS: When connected to power, the planer can be accidentally

turned ON. Always disconnect power when servicing or adjusting the components of the planer.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Woodstock SHOP FOX W1754 Manuel d'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Woodstock SHOP FOX W1754